YMU-00
Magazine Unloader
Located at the end of the SMT line, this equipment places PCBs in an empty magazine rack one at a time utilizing a pneumatic pusher.
- Touch screen (Operating panel)
- Tower lamp
- Manual width adjustment
- SMEMA interface
- Controlled by PLC
- Magazine slot – 50ea
- Pitch selection (1~4 pitch)
- Jam detection (Pneumatic )
- Magazine capacity : upper 2 / lower 2
- Mode : By pass / Buffering (FIFO, LIFO) / Loading / Unloading / NG stacking
Specifications
| Item | Standard | ||||
|---|---|---|---|---|---|
| Line Flow | Left to Right | Right to Left | |||
| Fixed Rail | Front | Rear | |||
| Pass Line (mm) | 950±20 | 900±20 | |||
| Voltage & Frequency | 220V±(10%) & 50 ~ 60Hz | 110V±(10%) & 50 ~ 60Hz | |||
| PCB Size |
| ||||
| Min.PCB (LXW) (mm) | 70 X 50 | ||||
| Max.PCB (LXW) (mm) |
| ||||
| Item | SMT | ||||||
|---|---|---|---|---|---|---|---|
| PCB Top/Bottom Clearance (mm) | 30 / 25 | ||||||
| PCB Edge (mm) | 3 | ||||||
| PCB Loading Weight (kg) | 3 | ||||||
| Conveyor Belt | Flat edge belt | ||||||
| Conveyor Speed (mm/sec) * | 200 | ||||||
| PCB Thickness (mm) | 0.6 ~ 4.0 | ||||||
| PCB Color | Green | ||||||
| PCB In/Out Sensor | Single sensor | ||||||
| Magazine Size (L X W X H)(mm) |
| ||||||
| Magazine Full Rack (kg) |
| ||||||
| Magazine Slot (ea) | 50 | ||||||
| Magazine A size (mm) | 34 | ||||||
| Magazine B size (mm) | 35 | ||||||
| PCB Stacking | Bottom to Upper (1 to 50) | ||||||
| Magazine Loading | Upper to Bottom | ||||||
| Pitch | 1~4 (10 ~ 40mm) | ||||||
| Magazine Capacity (ea) | Upper 2 / Lower 2 | ||||||
| Jam Detect Function * | Pneumatic | ||||||
| Safety Cover | Outer / Motor | ||||||
| Width Adjustment * | Manual | ||||||
| Interface | SMEMA Pin No. 1, 2, 3, 4, 5, 6 | ||||||
| Smema Cable | 3m / 1 ea | ||||||
| Alarm | Tower lamp (3 color) | ||||||
| Color * | SR RAL 7035 : NON ESD (H-GY2912-T3-Samhwa Paints) | ||||||
| Air Supply | 0.5Mpa (5bar) | ||||||
| Air Usage | 11.30 ℓ/min | ||||||
| Electricity Consumption | 335W |
Option Specification
| Item | CODE No. | Option |
|---|---|---|
| Conveyor Speed (mm/sec) * | O-10O-HW0-0104 | 1~200 / Analog / 1ea |
| Width Adjustment * | O-10O-HW0-0205 | Auto |
| High Speed Magazine Change | O-10O-HW1-0100 | – |
| Jam Detect Function * | O-10O-HW1-0202 | Electric(Step motor) |
| Width Synchronization | O-10O-SW0-0200 | via RS-485 |
| Line Control | O-20O-LC0-0100 | Hermes |
| O-20O-LC0-0200 | Smart kit (LAN communication PLC) | |
| Color * | O-40O-CO0-0100 | ESD powder coating(RAL 7035) |
