YWC-20 / YWC-21 / YWC-22
Work Conveyor – Work
This equipment connects SMT machines and permits PCB examination.
- On/Off switch
- Buzzer
- Manual width adjustment
- Inspection segment – In / Center / Out
- Completio n switch – Button type
- Illuminatio n + Shelf
- SMEMA interface
- Controlled by PLC
- Length/Segment – 500/1 or 1000/2 or 1500/2
Specifications
| Item | Standard | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Line Flow | Left to Right | Right to Left | ||||||||
| Fixed Rail | Front | Rear | ||||||||
| Pass Line (mm) | 950 ± 20 | 900 ± 20 | ||||||||
| Voltage & Frequency | 220V±(10%) & 50 ~ 60Hz | 110V±(10%) & 50~60Hz | ||||||||
| PCB Size |
| |||||||||
| Min.PCB (LXW) (mm) | 70 X 50 | |||||||||
| Max.PCB (LXW) (mm) |
| |||||||||
| Item | SMT | POST PROCESS | ||||||||
| PCB Top/Bottom Clearance (mm) | 30 / 25 | 60 / 60 | ||||||||
| PCB Edge (mm) | 3 | 5 | ||||||||
| PCB Loading Weight (kg) | 3 | 8 | ||||||||
| Conveyor Belt | Flat edge belt | Pin Chain | ||||||||
| Conveyor Speed (mm/sec) * | 200 | 100 | ||||||||
| PCB Thickness (mm) | 0.6 ~ 4.0 | |||||||||
| PCB Color | Green | |||||||||
| PCB In/Out Sensor | Single sensor | |||||||||
| Mode | By pass / Inspection | |||||||||
| Length (mm) / Segment (ea) | SMT |
| ||||||||
| POST PROCESS |
| |||||||||
| Programmatically, it is standard to use 1 segment. | ||||||||||
| Inspection Segment |
| |||||||||
| Complex Switch | Button Type | |||||||||
| Working Accessory | Illumination + Shelf | |||||||||
| Working Table (mm) | 200 | |||||||||
| Width Adjustment * | Manual | |||||||||
| Interface | SMEMA Pin No. 1, 2, 3, 4, 5, 6 | |||||||||
| Smema Cable | 3m / 1 ea | |||||||||
| Alarm | Buzzer | |||||||||
| Color * | SR RAL 7035 : NON ESD (H-GY2912-T3-Samhwa Paints) | |||||||||
| Electricity Consumption | 90W | |||||||||
Option Specification
| Item | CODE No. | Option | ||
|---|---|---|---|---|
| Conveyor Speed (mm/sec) * | SMT | O-10O-HW0-0104 | 500(L)mm | 1~200 / Analog / 1ea |
| 1000(L)mm | 1~200 / Analog / 2ea | |||
| 1500(L)mm | 1~200 / Analog / 3ea | |||
| POST PROCESS | 500(L)mm | 1~100 / Analog / 1ea | ||
| 700(L)mm | 1~100 / Analog / 1ea | |||
| 1000(L)mm | 1~100 / Analog / 2ea | |||
| 1500(L)mm | 1~100 / Analog / 3ea | |||
| 1500(L)mm | 1~100 / Analog / 2ea | |||
| Width Adjustment * | O-10O-HW0-0205 | Auto | ||
| Width Synchronization | O-10O-SW0-0200 | via RS-485 | ||
| Line Control | O-20O-LC0-0100 | Hermes | ||
| O-20O-LC0-0200 | Smart kit (LAN communication PLC) | |||
| Color * | O-40O-CO0-0100 | ESD powder coating(RAL 7035) | ||
