YPU-00
Stacker
As an unloader for an offline laser marking machine, it uses a cylinder to lift a bare board for stacking.
- Touch screen (Operating panel)
- Tower lamp
- Bare board stacking mode
- Controlled by PLC
- Manual width adjustment
- SMEMA interface)
Specifications
| Item | Standard | |
|---|---|---|
| Line Flow | Left to Right | Right to Left |
| Fixed Rail | Front | Rear |
| Pass Line (mm) | 950 ± 20 | 900 ± 20 |
| Voltage & Frequency | 220V±(10%) & 50 ~ 60Hz | 110V±(10%) & 50~60Hz |
| PCB Size | XL | |
| Min.PCB (LXW) (mm) | 70 X 70 | |
| Max.PCB (LXW) (mm) | 460 X 460 | |
| Item | SMT | |
| PCB Top/Bottom Clearance (mm) | 00 / 00 | |
| PCB Edge (mm) | 3 | |
| PCB Loading Weight (kg) | 3 | |
| PCB Stacking Weight (kg) | 20 | |
| Conveyor Belt | Flat edge belt | |
| Conveyor Speed (mm/sec) * | 200 | |
| PCB Thickness (mm) | 0.6 ~ 4.0 | |
| PCB Color | Green | |
| PCB In/Out Sensor | Single sensor | |
| Mode | Bare board stacking | |
| Width Adjustment * | Manual | |
| Interface | SMEMA Pin No. 1, 2, 3, 4, 5, 6 | |
| Smema Cable | 3m / 1 ea | |
| Alarm | Tower lamp (3 colors) | |
| Color * | SR RAL 7035 : NON ESD (H-GY2912-T3-Samhwa Paints) | |
| Air Supply | 0.5Mpa (5bar) | |
| Air Usage | 0.74 ℓ/min | |
| Electricity Consumption | 120W | |
Option Specification
| Item | CODE No. | Option |
|---|---|---|
| Conveyor Speed (mm/sec) * | O-10O-HW0-0104 | 1~200 / Analog / 2ea |
| Width Adjustment * | O-10O-HW0-0205 | Auto |
| Width Synchronization | O-10O-SW0-0200 | via RS-485 |
| Line Control | O-20O-LC0-0100 | Hermes |
| O-20O-LC0-0200 S | Smart kit (LAN communication PLC) | |
| Color * | O-40O-CO0-0100 | ESD powder coating(RAL 7035) |