YTN-00
Tower + NG Conveyor
This unit is positioned after the SPI/AOI machine and inspects the NG boards in the line.
The operator can visually evaluate NG boards from the rack on the second layer of the conveyor while passing GOOD boards.
- Touch screen (Operating panel)
- Tower lamp
- Manual width adjustment
- Controlled by PLC
- Slot of rack – 20ea (±15mm)
- Pitch selection (1 pitch)
- SMEMA interface
Specifications
| Item | Standard | |
|---|---|---|
| Line Flow | Left to Right | Right to Left |
| Fixed Rail | Front | Rear |
| Voltage & Frequency | 220V±(10%) & 50 ~ 60Hz | 110V±(10%) & 50 ~ 60Hz |
| PCB Size | M | XL |
| Min.PCB (LXW) (mm) | 70 X 50 | |
| Max.PCB (LXW) (mm) | 330 X 250 | 460 X 460 |
| Item | SMT | |
| PCB Top/Bottom Clearance (mm) | 30 / 25 | |
| PCB Edge (mm) | 3 | |
| PCB Loading Weight (kg) | 3 | |
| PCB Stacking Weight (kg) | 50 | |
| Slot of Rack (ea) | 20 (±15mm) | |
| Pitch | 1 | |
| Conveyor Belt | Flat edge belt | |
| Conveyor Speed (mm/sec) * | 200 | |
| PCB Thickness (mm) | 0.6 ~ 4.0 | |
| PCB Color | Green | |
| PCB In/Out Sensor | Single sensor | |
| Mode | FIFO, LIFO / By pass / NG Stacking | |
| Width Adjustment * | Manual | |
| Interface | SMEMA Pin No. 1, 2, 3, 4, 5, 6 | |
| Smema Cable | 3m / 1 ea | |
| Alarm | Tower lamp (3 colors) | |
| Color * | SR RAL 7035 : NON ESD (H-GY2912-T3-Samhwa Paints) | |
| Air Supply | 0.5Mpa (5bar) | |
| Air Usage | 11.30 ℓ/min | |
| Electricity Consumption | 256W | |
Option Specification
| Item | CODE No. | Option | |
|---|---|---|---|
| Conveyor Speed (mm/sec) * | O-10O-HW0-0104 | Rack Part | 1~200 / Analog / 1ea |
| Conveyor Part | 1~200 / Analog / 2ea | ||
| Width Adjustment * | O-10O-HW0-0205 | Rack Part | Auto / 1ea |
| Conveyor Part | Auto / 1ea | ||
| Width Synchronization | O-10O-SW0-0200 | via RS-485 | |
| NG Communication | O-10O-SW0-0300 | via RS-232 | |
| Line Control | O-20O-LC0-0100 | Hermes | |
| O-20O-LC0-0200 | Smart kit (LAN communication PLC) | ||
| Color * | O-40O-CO0-0100 | ESD powder coating(RAL 7035) | |
