YCM-00
Combi – Magazine
The equipment is situated after the SPI/AOI, allowing for simultaneous PCB buffering and NG PCB loading.
- Touch screen (Operating panel)
- Tower lamp
- Manual width adjustment
- SMEMA interface
- Controlled by PLC
- Magazine slot – 50ea
- Slot of rack – 20ea (±15mm)
- Pitch selection (1~4 pitch)
- Jam detection (Pneumatic)
Specifications
| Item | Standard | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Pass Line (mm) | 950±20 | 900±20 | |||||||
| Voltage & Frequency | 220V±(10%) & 50 ~ 60Hz | 110V±(10%) & 50~60Hz | |||||||
| PCB Size |
| ||||||||
| Min.PCB (LXW) (mm) | 120 X 50 | ||||||||
| Max.PCB (LXW) (mm) |
| ||||||||
| Item | SMT | ||||||||
| PCB Top/Bottom Clearance | 30 / 25 | ||||||||
| PCB Edge (mm) | 3 | ||||||||
| PCB Loading Weight (kg) | 3 | ||||||||
| Slot of Rack (ea) | 20 (±15mm) | ||||||||
| Pitch | Rack | 1~4 (30~120mm) | |||||||
| Magazine | 1~4 (10~40mm) | ||||||||
| Conveyor Belt | Flat edge belt | ||||||||
| Conveyor Speed (mm/sec) * | 200 | ||||||||
| PCB Thickness (mm) | 0.6 ~ 4.0 | ||||||||
| PCB Color | Green | ||||||||
| PCB In/Out Sensor | Single sensor | ||||||||
| Magazine Size (LXWXH)mm |
| ||||||||
| Magazine Full Rack (kg) |
| ||||||||
| Magazine Slot (ea) | 50 | ||||||||
| Magazine A size (mm) | 34 | ||||||||
| Magazine B size (mm) | 35 | ||||||||
| Magazine Capacity (ea) | 1 | ||||||||
| NG PCB Stacking | Upper to Bottom (50 to 1) | ||||||||
| Jam detect function | Pneumatic | ||||||||
| Mode | FIFO, LIFO / By pass / NG Stacking | ||||||||
| Width Adjustment * | Manual | ||||||||
| Interface | SMEMA Pin No. 1, 2, 3, 4, 5, 6 | ||||||||
| Smema Cable | 3m / 1 ea | ||||||||
| Alarm | Tower lamp (3 colors) | ||||||||
| Color * | SR RAL 7035 : NON ESD (H-GY2912-T3-Samhwa Paints) | ||||||||
| Air Supply | 0.5Mpa (5bar) | ||||||||
| Air Usage | 8.0 ℓ/min | ||||||||
| Electricity Consumption | 600W | ||||||||
Option Specification
| Item | CODE No. | Option | |
|---|---|---|---|
| Conveyor Speed (mm/sec) * | O-10O-HW0-0104 | Rack Part | 1~200 / Analog / 3ea |
| Conveyor Part | 1~200 / Analog / 1ea | ||
| Width Adjustment * | O-10O-HW0-0205 | Rack Part | Auto / 1ea |
| Conveyor Part | Auto / 1ea | ||
| Width Synchronization | O-10O-SW0-0200 | via RS-485 | |
| Line Control | O-20O-LC0-0100 | Hermes | |
| O-20O-LC0-0200 | Smart kit (LAN communication PLC) | ||
| Color * | O-40O-CO0-0100 | ESD powder coating(RAL 7035) | |