ZM-R7220A
Infrared Soldering Station
The ZM-R7220A infrared SMD rework station is an intelligent infrared soldering station that has real-time temperature monitoring, an optical alignment system, and quick heating and cooling. Zhuomao, a iir soldering station manufacturer, pledges to deliver high-quality infrared BGA machines. Significantly, the DJK infrared soldering station is reasonably priced. In addition, the Seamark ZM-R7220A ir rework station was previously known as the ZM-R6200c.
Real-time Temperature Monitoring
- Real-time temperature display, with automatic curve analysis function.
Optical Alignment System
- High-definition CCD (2m pixels) digital imaging, automatic optical zoom system, manual control and laser red-dot alignment.
Specifications
| Project | Specification |
|---|---|
| Power Supply | AC220V±10% 50/60HZ |
| Power | 5.65KW(Max), Top heater(1.45KW), Bottom heater (1.2KW), IR Preheater (2.7KW), Other(0.3KW) |
| PCB Size | 412*370mm(Max); 6*6mm(Min) |
| BGA Chip Size | 60*60mm(Max); 2*2mm(Min) |
| IR Heater Size | 285*375mm |
| Temperature Sensor | 1 pcs |
| Operation Method | 7″ HD touchscreen |
| Control System | Autonomous heating control system V2 (software copyright) |
| Display System | 15″ SD industrial display (720P front screen) |
| Alignment System | 2 Million Pixel SD digital imaging system, automatic optical zoom with laser red-dot indicator |
| Vacuum Adsorption | Automatic |
| Alignment Accuracy | ±0.02mm |
| Temperature Control | K-type thermocouple closed-loop control with accuracy up to ±3℃ |
| Feeding Device | No |
| Positioning | V-groove with universal fixture |
| Dimensions | L685*W633*H850mm |
| Weight | 76KG |
Option Specification
The primary distinction between a hot air rework station and an IR BGA Rework Station is how they heat the board. A hot air rework station transfers heat from the tool-to-board interface to the solder balls, whereas an IR BGA Rework Station employs infrared light to heat each ball just enough to melt.
The second significant distinction is how they regulate temperature: Hot Air Rework Stations use PID temperature control, whereas IR BGA Rework Stations use proportional pressure modulation (PPM). PPM is more precise than PID because it can detect pressure changes within milliseconds. This implies that you can quickly apply flux to a board or reflow solder balls on a board.